Vehicle Recalls & Defects

2004 Saab 9-3 NHTSA Vehicle Recall Details

 
2004 Saab 9-3 Overview
Class:Compact Cars
Seating Capacity:4
Curb Weight:3520
Wheelbase:105.3
EPA city/hwy:21/30
Fuel Capacity:16.4
Drivetrain:Front Wheel Drive
NHTSA Campaing ID Number 05V236000
Make:SAABModel:9-3Year:2004
Manufacturer:Saab Cars Usa, Inc.
NHTSA Campaing ID Number:05V236000Recall Date:05/19/2005
Component:SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM:HOSES, LINES/PIPING, AND FITTINGS
Potential Number Of Units Affected:68654
Summary:
Certain sport sedan and convertible passenger vehicles were produced with a vacuum pipe check valve for the brake booster that may fail from exposure to elevated temperatures. this could result in sudden loss of power brake assist, usually with little or no warning.
Consequence:
If this condition were to occur when minimum stopping distance is required, a crash could occur.
Remedy:
Dealers will install a new redesigned check valve. the recall began on march 17, 2006. owners should contact saab at 1-800-955-9007.
Notes:SAAB 9-3 15019 / 05057
NHTSA Campaing ID Number 04V226000
Make:SAABModel:9-3Year:2004
Manufacturer:Saab Cars Usa, Inc.
NHTSA Campaing ID Number:04V226000Recall Date:05/11/2004
Component:SEAT BELTS:FRONT:RETRACTOR
Potential Number Of Units Affected:31335
Summary:
Some sport sedans were built with seat belt retractors that were damaged during the manufacturing process. if damaged, over time, the automatic tensioning system (ats) cable in the seat belt retractor could break causing the belt webbing to not retract.
Consequence:
In the event of a crash, a front seat occupant may receive more severe injuries.
Remedy:
Dealers will replace the seat belt retractor assemblies. the recall began on january 24, 2005. owners should contact saab at 1-800-955-9007.
Notes:SAAB 9-3 15017
NHTSA Campaing ID Number 03V514000
Make:SAABModel:9-3Year:2004
Manufacturer:Saab Cars Usa, Inc.
NHTSA Campaing ID Number:03V514000Recall Date:12/10/2003
Component:SEATS:FRONT ASSEMBLY:RECLINER
Potential Number Of Units Affected:1658
Summary:
Certain passenger vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 207, ¿seating systems.¿ the backrest locking mechanism on some front seats may have been installed incorrectly.
Consequence:
This could cause the seat back to fold forward in a frontal crash, resulting in injury to the driver and/or front seat passenger.
Remedy:
Dealers will inspect the vehicle¿s front seats to determine if they are equipped with the improperly installed component. if either or both of the seats have this component, they will be replaced. the dealer may need to order a complete new seat or seats (including matching upholstery) and the parts may take up to two to four weeks to arrive. saab will provide a rental car for the owner until the new seat(s) is (are) available and installed by the dealer. owne
Notes:SAAB 9-3 15014